Internet Download Manager 6.19 Final - Full (Crack, Serial, Patch)

Install Notes


1. First Uninstall any previous version of IDM


2. Restart your PC 


3. Go to my IDM rar archive and extract content from it. You may need WinRAR/7z or any other similar software installed to open the file.


4. Go to Patch and Crack folder and click "Unregister.reg" key file.


5. Now install IDM with the setup file- file name "IDM_Setup_6.17_b08_Full.exe"


6. During install you will get many pop up window - just close all the window


7. Now exit Exit IDM from the icon tray from bottom right corner of the desktop


                          


8. Now again go to Patch and crack folder and copy the -"IDMan.exe" file and paste and replace it in - C:\Program Files\Internet Download Manager i.e [C drive> Program File> Internet download manager folder.]


9. Now determine your operating system architecture weather it is 32 bit or 64 bit. 


To Know the architecture go to run Press [Windows key+R] 

               



                                + R


10. Type CMD and press Enter


11. A black window will open. Type the following and press enter


echo %PROCESSOR_ARCHITECTURE%


12. If it shows x86 then your PC is 32 bit or if it shows x64 then your pc is 64 bit



13. Now that you know your Operating system Bit rate go to Patch & Crack folder and dubble click "RegKey Windows 32bit" if your pc is x86 or dubble click "RegKey Windows 64bit" if your pc is x64. Do not Dubble click both of them. 


14. Now run Internet Download Manager from Start Manu>All program.




There is also a installation instruction given inside the rar file.  You may need WinRAR/7z or any other similar software installed to open the file.



N:B- Never update IDM coz update will damage your registration


Note: If you get the message "Fake serial number" after installing, uninstall IDM, run "Unregister.IDM" to remove any previous serial from registry, reboot PC, install IDM again, use the crack & regfile to activate it.

!Optional! You can also try adding the following to your hosts file.

C:\Windows\System32\drivers\etc  hosts - Then Right click & open with notepad

(You will need to take ownership of the hosts file and make sure you have all permissions set)

127.0.0.1 www.internetdownloadmanager.com

127.0.0.1 internetdownloadmanager.com

I will always be updating this release with major releases so always check back.


Enjoy! - Shamim Khan 26/08/2013

Download:Internet download Manager 6.19 Full - (Crack Serial Patch)


Download:Internet download Manager 6.19 Build 02 - (Crack Serial Patch)

ATTENTION: Press SKIP AD after 5 seconds in next page

Read More

Close All Open Windows In Windows 7

If you need to close multiple applications and windows at once, then it will definitely be time consuming. Try Close All Windows, it is a light-weight tool which closes all open windows simultaneously with a single click.

This tool was originally developed back in 2006 for Windows XP only. But why not give it a shot on Windows 7 as well? This tool has no interface, just run it and it will close all windows instantly. To make things easier, pin it to the Windows 7 Taskbar. A simple click and it closes all windows without any problems.

Download Close All Windows

It works on Windows XP, Windows Vista, and has been tested on Windows 7 too. If you need a more advanced tool, try out SmartClose, which closes and restores applications and works great on Windows 7 as well. Enjoy!

Read More

How To Get Mac Style ALT+Tab Preview In Windows

ALT+Tab is a common hotkey combination for previewing active windows on the desktop. Windows and Mac both display their default icons when this hotkey is used on either of the operating systems. If you are a Mac user who recently switched to Windows or would simply like to give a more stylish look to the ALT+Tab preview, then you must try MacSwitch. It is a simple application that replaces the default Windows Alt-Tab style with the Mac OS X style.

Simply install and run MacSwitch to replace the default ALT+Tab Windows style to Mac OS X style. To go back to the default appearance, press ALT+Tab, right-click on the dialog and select Exit. You can add the MacSwitch to the startup folder to auto start it with Windows.

MacSwitch is a stylish way of viewing active windows as compared to the default Windows ALT+Tab appearance. However, one drawback is that Windows displays content of the opened windows which does not appear in the Mac style. For example, if you have opened the D drive in Computer (My Computer), it will be visible in the preview if you are using the default Windows Alt+Tab preview.

Download Mac View

Read More

Useful Run Commands for Windows OS

1.Accessibility Controls - access.cpl



2.Add Hardware Wizard - hdwwiz.cpl



3.Add/Remove Programs - appwiz.cpl



4.Administrative Tools - control admintools



5.Automatic Updates - wuaucpl.cpl



6.Bluetooth Transfer Wiz - fsquirt



7.Calculator - calc



8.Certificate Manager - certmgr.msc



9.Character Map - charmap



10.Check Disk Utility - chkdsk



11.Clipboard Viewer - clipbrd



12.Command Prompt - cmd



13.Component Services - dcomcnfg



14.Computer Management - compmgmt

Read More

Nokia phone secrets

1. On the main screen type: *#06# for checking the IMEI (International Mobile Equipment Identity).

*#7370# reset all settings.

*#7780# reset to factory settings.

*#67705646# This will clear the LCD display(operator logo).

*#0000# To view software version.

*#2820# Bluetooth device address.

*#746025625# Sim clock allowed status.

*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN like N80

*#pw+1234567890+1# Shows if sim have restrictions.

*#92702689# - Takes you to a secret menu where you may find some of the information below:

1. Displays Serial Number.

2. Displays the Month and Year of Manufacture

3. Displays (if there) the date where the phone was purchased (MMYY)

4. Displays the date of the last repair - if found (0000)

5. Shows life timer of phone (time passes since last start)



*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.

*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.

*#4720# - Half Rate Codec activation.

*#4720* - Half Rate Codec deactivation. The phone will automatically restart.



2. If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#

Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345



Press *#3925538# to delete the contents and code of wallet.



*#7328748263373738# resets security code.

Default security code is 12345



Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C then press * message should flash, press * again and 04*pin*pin*pin#



Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.)



Press and hold "0" on the main screen to open wap browser.

Read More

Unlimited free call from mobile

1) Supported mobile: Nokia N, E series, Sonyericsson, iPhone, Blackberry, samsung etc or any 3rdgeneration mobile. 2) Minimum P6 (1gb) or P2(unlimited) internet package. 3) Internet Setting: Go to create message in your mobile. 4) Write P6 or P2 and send 5000. (P2 must be Postpaid sim) P6 for 345 taka and P2 977 taka. 5) After another message write Y and send 5000. 6) Go to your mobile web browser and write m.fring.com. 7) Download and install Fring from here. 8) 1st need user registration and invite friend or add friend - Fring user, gmail or hotmail user. 9) And ready to unlimited free call and chat user to user any country or any place.

Read More

Tips for using Laptop in hot & warm weather

Follow these tips to take proper care of your laptop; in warm and hot weather:



1. Safe Temperature Range: Most laptop computers operate properly in the safe temperature range of 50 to 95 degrees Fahrenheit or 10 to 35 degrees Celsius. Keep in mind that when bringing a laptop in from the warm hot air, the laptop must cool down to the interior temperature before you use it. By the same token if you use your laptop outdoors, then let the laptop warm up to the outside temperature before starting it up.



2. Hot Cars: Just as you wouldn’t leave people or animals in a car in hot weather, you should not leave your laptop and other mobile gear either. Leaving your laptop closed in a vehicle in hot temperatures will cause damage to your laptop. The heat is not good for the internal components or the external casings. 



3. Bright Sun: Never leave your laptop where it is exposed to direct sunlight, whether it is in use or shut down. If you must use your laptop outside in bright conditions you can use either

a laptop glare screen which cuts down on the glare caused by the sun or a laptop hood which cuts down on the amount of light directed at the laptop display.



4. Humidity: In warm weather people are fond of saying it’s not the heat itself that bothers them but the dreaded humidity. Humidity is the amount of moisture in the air and the recommended safe range of relative humidity is 10-80%. Moisture can cause damage to the internal components of a laptop and you may not even realize that the damage has occurred.5. Take it Out

If you use your laptop in hot temperatures consider using a removable hard drive to store your data on. This way you can help protect your data and ensure that your removable hard drive stays protected from exposure to heat and the sun.





6. Weather Watching: In warm, hot weather there are more storms, often with little or no warning and more severe weather occurrences which mobile professionals must face when traveling. Equipment to help protect your mobile gear includes having surge protectors, power invertors and spare batteries. External battery charges that don’t require an electrical connection are another wise investment.



7. Keep it Cool: Use a laptop stand to disperse heat that your laptop generates. Laptop stands are available in a variety of styles to suit your working needs. There are laptop stands which include fans to help dissipate the heat and keep your laptop working at its best.



8. Pack it Wisely: Using a properly fitted and well-padded laptop case for your mobile gear will help keep it insulated against heat, moisture and direct sunlight. When buying your laptop case make sure all your mobile gear will fit securely and be protected from the effects of weather.

Read More